Trail Saddle

Western Saddles

Trail Saddles
Comfort Series Trail Saddle Hand Engraved Tooling T-9716
Tree: Comfort Trail Tree, Custom Fiberglass Covered Wood The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 15", 16", and 17".
Bars: Available in Semi-QH, Full Quarter Horse, Extra Wide for mutton withers, draft crosses, haflingers, etc, some at extra cost.
Weight: Approximately 29 lbs.
Gullet Height: 8"
Swell: A-Fork; Width 10". with Bucking Rolls
Skirts: Length 26" (on 16” seat); Width 11" at front and 9" at rear, lined with faux shearling, 90% wool.                   
Cantle: Height 4";  Width  13"; Dish 1 ½"; Style 1 ½" Cheyenne Roll, Hand Sewn.
Horn: Height 2 ¾", Diameter 2 ½", Leather covered, Hand Sewn.
Stirrup Leathers: 2 ½" with Leather Covered Blevins Buckles, machine sewn and copper riveted
at the Blevins Buckles and the top of the fenders
Stirrups: Wooden metal bound natural rawhide covered, hand laced bell stirrups with 3" treads.
Rigging: Dropped plate rigging in 7/8’s position. Hardware is Stainless Steel Horseshoe Brand.
Leather: Available with 13-15 oz. Thoroughbred Mahogany, Walnut, or Golden Skirting.
Trim: Custom Conchos with Latigo Stringss, All Hardware including the saddle screws and washers is Stainless Steel.  Saddle strings cut from premium 5-7 oz.
burgundy latigo. The bicycle style padded seat is constructed with 3/8" close cell foam covered with 4-5 oz. chap leather. We use the Union Lockstitch to sew
and pull the 277 white nylon thread tight at 5 ½ stitches to the inch.
Finish: Each Saddle first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner.
Tooling: Hand Tooled Carlos Boarder, Hand Engraved Floral

Special Price $ 2,695.00     # T-9716
Click on Picture to Enlarge
Trail Saddles, Trail Saddle, Western Saddle, Western Saddles, Western Trail Saddle, Western Trail Saddles


We can Customize any Saddle to fit your needs, Colors, Tooling and for a Variety of Horses and Mules
Comfort Series Trail Saddle T-9002
Tree: Comfort Trail Tree, Custom Fiberglass Covered Wood The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 15", 16", and 17".
Bars: Available in Semi-QH, Full Quarter Horse, Extra Wide for mutton withers, draft crosses, haflingers, etc., some at extra cost
Weight: Approximately 29 lbs.
Gullet Height: 8"
Swell: A-Fork; Width 10".
Skirts: Length 26" (on 16” seat); Width 11" at front and 9" at rear, lined with faux shearling, 90% wool.                   
Cantle: Height 4";  Width  13"; Dish 1 ½"; Style 1 ½" Cheyenne Roll, Hand Sewn.
Horn: Height 2 ¾", Diameter 2 ½", Leather covered, Hand Sewn.
Stirrup Leathers: 2 ½" with Leather Covered Blevins Buckles, machine sewn and copper riveted
at the Blevins Buckles and the top of the fenders
Stirrups: Wooden metal bound natural rawhide covered, hand laced bell stirrups with 3" treads.
Rigging: Dropped plate rigging in 7/8’s position. Hardware is Stainless Steel Horseshoe Brand.
Leather: Available with 13-15 oz. Thoroughbred Mahogany, Walnut, or Golden Skirting.
Trim: Horseshoe Brand Cathedral Conchos with Tie Loops, All Hardware including the saddle screws and washers is Stainless Steel.  Saddle strings cut from
premium 5-7 oz. burgundy latigo. The bicycle style padded seat is constructed with 3/8" close cell foam covered with 4-5 oz. chap leather. We use the Union
Lockstitch to sew and pull the 277 white nylon thread tight at 5 ½ stitches to the inch.
Finish: Each Saddle first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner.
Tooling: Border Tooled with stems and turnbacks.

Special Price $ 2,095.00     # T-9002
Click on Picture to Enlarge
Comfort Series Premium Trail Saddle T-5008
Tree: Comfort Trail Tree, Custom Fiberglass Covered Wood The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 15", 16", and 17".
Bars: Available in Semi-QH, Full Quarter Horse, Extra Wide for mutton withers, draft crosses, haflingers, etc., some at extra cost
Weight: Approximately 30 lbs.
Gullet Height: 7.5"
Swell: Width 12.5"
Skirts: Length 26.5" (on 16” seat), lined with faux shearling, 90% wool. Skirts are Close Contact Design             
Cantle: Height 3.5";  Width  13"; Dish 1 ½"; Style 1 ½" Cheyenne Roll, Hand Sewn.
Horn: Height 2 ¾", Diameter 2 ½", Leather covered, Hand Sewn.
Stirrup Leathers: 2 ½" with Leather Covered Blevins Buckles, machine sewn and copper riveted
at the Blevins Buckles and the top of the fenders
Stirrups: Wooden metal bound natural rawhide covered, hand sewn and tooled stirrups with 3" treads.
Rigging: Dropped Dee in 7/8’s position. Hardware is Stainless Steel Horseshoe Brand.
Leather: Available with 13-15 oz. Thoroughbred Mahogany, Walnut, or Golden Skirting.
Trim: Cross Conchos, All Hardware including the saddle screws and washers is Stainless Steel. The padded seat is constructed with 3/8" close cell foam
covered with 4-5 oz. chap leather. We use the Union Lockstitch to sew and pull the 277 white nylon thread tight at 5 ½ stitches to the inch.
Finish: Each Saddle first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner.
Tooling: Fully Hand Engraved on Shirts, Housing, Stirrups, Cantle and Pommel

Special Price $ 2,995.00     # T-5008                                                   
Click on Picture to Enlarge
Click on Picture to Enlarge
Comfort Series Trail Saddle T-9004
Tree: Comfort Trail Tree, Custom Fiberglass Covered Wood The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 15", 16", and 17".
Bars: Available in Semi-QH, Full Quarter Horse, Extra Wide for mutton withers, draft crosses, haflingers, etc., some at extra cost
Weight: Approximately 29 lbs.
Gullet Height: 8"
Swell: A-Fork; Width 10".
Skirts: Length 26" (on 16” seat); Width 11" at front and 9" at rear, lined with faux shearling, 90% wool.                   
Cantle: Height 4";  Width  13"; Dish 1 ½"; Style 1 ½" Cheyenne Roll, Hand Sewn.
Horn: Height 2 ¾", Diameter 2 ½", Leather covered, Hand Sewn.
Stirrup Leathers: 2 ½" with Leather Covered Blevins Buckles, machine sewn and copper riveted
at the Blevins Buckles and the top of the fenders
Stirrups: Wooden metal bound natural rawhide covered, hand laced bell stirrups with 3" treads.
Rigging: Dropped plate rigging in 7/8’s position. Hardware is Stainless Steel Horseshoe Brand.
Leather: Available with 13-15 oz. Thoroughbred Mahogany, Walnut, or Golden Skirting.
Trim: Horseshoe Brand Cathedral Conchos with Tie Loops, All Hardware including the saddle screws and washers is Stainless Steel.  Saddle strings cut from
premium 5-7 oz. burgundy latigo. The bicycle style padded seat is constructed with 3/8" close cell foam covered with 4-5 oz. chap leather. We use the Union
Lockstitch to sew and pull the 277 white nylon thread tight at 5 ½ stitches to the inch.
Finish: Each Saddle first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner.
Tooling: Border Tooled with stems and turnbacks.

Special Price $ 2,395.00     # T-9004
Click on Picture to Enlarge
T-3800 Natural Wade Seat Trail Saddle T-3800
Tree: Natural Ride Trail Tree, Custom Fiberglass Covered Wood. The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 15", 16", and 17".
Weight: Approximately 29 lbs.
Gullet Width: 7" Full QH Bars --- Others Available
Gullet Height: 8"
Swell: A-Fork; Width 10".
Skirts: Length 26" (on 16" seat); Width 13 ½" at front and 9" at rear, lined with faux shearling, 90% wool.
Cantle: Height 4";  Width  13"; Dish 1 ½"; Style 1 ½" Natural Rawhide Covered Pencil Roll, Hand Sewn.
Horn: Height 2 ¾", Diameter 2 ½", Leather covered, Hand Sewn.
Stirrup Leathers: 2 ½" with Leather Covered Blevins Buckles, machine sewn and copper riveted at the Blevins Buckles and the top of the fenders.
Stirrups: Wooden metal bound natural rawhide covered, hand laced bell stirrups with 3" treads.
Rigging: Horseshoe Brand Flat Plate in-skirt, 7/8’s position, 2 ½" beveled stainless steel dees in rear.
Flank Cincha: 3" tapering to 1 ¾"; burgundy latigo lined with stainless steel roller buckles.
Leather: 13-15 oz. Mahogany Skirting.
Trim:  All Hardware including the saddle screws and washers is stainless steel.  Saddle strings cut from premium 5-7 oz. Burgandy latigo. We use the Union
Lockstitch to sew and pull the 277 white nylon thread tight at 5 ½ stitches to the inch.
Finish: Each Saddle first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner.
Edges are burnished by hand rubbing.
Tooling: Carlos Border.

Special Price $ 2,395.00        # T-3800              Bucking Rolls can be left off for credit of $ 75.00
Click on Picture to Enlarge
Click on Picture to Enlarge
M-3100 Old Fashined Cowboy Saddle, Many use it for Trails and Mounted Shooting - Round Skirt
Tree: Custom Tree. Rawhide Covered Wood. The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 14", 15 " and 16".
Weight: Approximately 40 lbs.
Gullet Width: 6 ¾" QH BArs
Gullet Height: 8 ½"
Swell: Round Fork; Width 12".
Skirts: Length 27" (on 16"seat); Width 12 ½", lined with faux shearling, 90% wool.
Cantle: Height 4";  Width  13"; Dish 1 ½"; Style ½" Pencil Roll, Hand Sewn.
Horn: Height 3 1/4", Diameter 2 1/4" Leather covered, Hand Sewn.
Stirrup Leathers: 2 ½" with Leather Covered Blevins Buckles, machine sewn and copper riveted at the Blevins Buckles and the top of the fenders
Stirrups: Wooden 3" Bell
Rigging: Sam Stagg in 7/8's position, leather covered stainless steel dees. Rigged with four 1 ¾" tie straps.
Leather: Premium 13-15 oz. Thoroughbred Walnut Skirting.
Trim: All Hardware including the saddle screws and washers is Stainless Steel.  Saddle strings on this eight string set hang 36" from the rear button, 18" from the
seat buttons, and 24" from the front button.  We use the Union Lockstitch to sew and pull the 277 white nylon thread tight at 5 ½ stitches to the inch.
Finish: Each Mounted Shooter Saddle first receives several warm coats of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner.
Tooling: Running W border.
Style: A unique combination of period styling and today's comfort allow us to offer you a saddle with the authentic look you're after and yet have the feel of a
competition saddle.

Special Price $ 2,
695.00    # M-3100       Other Oil Colors Available  ---- Round Skirt Available
R-8006 A-Fork Wade Style Hard Seat Tail or Roping Saddle
Tree: Batie Rawhide covered and rawhide laced. The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 15" and 16"
Weight: Approximately 35 lbs.
Gullet Width: 6.75" Quarter Horse Bars - Other Available
Gullet Height: 7 3/4"
Swell:  Width 10 ½"
Skirts: Length 26 ½"; Width 12", lined with faux shearling, 90% wool.
Cantle: Height 4"  Width  12 ½"; Dish 1 ½"; Style ½" Natural Rawhide Covered Pencil Roll, Hand Sewn. Cheyenne Roll Available add $75.00
Horn: Height 3", Diameter 3", rawhide tipped, leather covered, hand sewn with mule hide horn wrap.
Stirrup Leathers: 3" with leather covered Blevins Buckles
Stirrups: Wooden metal bound natural rawhide covered, hand laced bell stirrups with 3" treads.
Rigging: Dropped plate rigging in 7/8’s position. Hardware is Stainless Steel Horseshoe Brand.
Flank Cincha: 4" to 1 ¾"; burgundy latigo lined with deluxe stainless steel roller buckles.
Leather: 13-15 oz. Premium Thoroughbred Walnut Skirting.
Trim: All Hardware including the saddle screws and washers is stainless steel.  Saddle strings cut from premium 7-8 oz. burgundy latigo. We
use the Union Lockstitch to sew and pull the 277 white nylon thread tight at 5 1/2 stitches to the inch.
Finish: Each Saddle receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner. Edges are
burnished by hand rubbing.
Tooling: Hand Tooled Basket with Barbed Wire Border

Special Price $ 2,
695.00     # R-8006
Click on Picture to Enlarge
Comfort Series Trail Saddle - Square Skirt Model T-9400
Tree: Comfort Trail Tree, Custom Fiberglass Covered Wood The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 15", 16", and 17".
Bars: Available in Semi-QH, Full Quarter Horse, Extra Wide for mutton withers, draft crosses, haflingers, etc., some at extra cost
Weight: Approximately 29 lbs.
Gullet Height: 8"
Swell: A-Fork; Width 10".
Skirts: Length 26" (on 16” seat); Width 11" at front and 9" at rear, lined with faux shearling, 90% wool.                   
Cantle: Height 4";  Width  13"; Dish 1 ½"; Style 1 ½" Cheyenne Roll, Hand Sewn.
Horn: Height 2 ¾", Diameter 2 ½", Leather covered, Hand Sewn.
Stirrup Leathers: 2 ½" with Leather Covered Blevins Buckles, machine sewn and copper riveted
at the Blevins Buckles and the top of the fenders
Stirrups: Wooden metal bound natural rawhide covered, hand laced bell stirrups with 3" treads.
Rigging: Dropped plate rigging in 7/8’s position. Hardware is Stainless Steel Horseshoe Brand.
Leather: Available with 13-15 oz. Thoroughbred Mahogany, Walnut, or Golden Skirting.
Trim: Horseshoe Brand Cathedral Conchos with Tie Loops, All Hardware including the saddle screws and washers is Stainless Steel.  Saddle strings cut from
premium 5-7 oz. burgundy latigo. The bicycle style padded seat is constructed with 3/8" close cell foam covered with 4-5 oz. chap leather. We use the Union
Lockstitch to sew and pull the 277 white nylon thread tight at 5 ½ stitches to the inch.
Finish: Each Saddle first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner.
Tooling: Border Tooled with stems and turnbacks.

Special Price $ 2,095.00     # T-9400
Click on Picture to Enlarge
Comfort Series Secure Trail Saddle T-9010
Tree: Comfort Trail Tree, Custom Fiberglass Covered Wood The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 15", 16", and 17".
Bars: Available in Semi-QH, Full Quarter Horse, Extra Wide for mutton withers, draft crosses, haflingers, etc., some at extra cost
Weight: Approximately 30 lbs.
Gullet Height: 7.5"
Swell: Swept Back 14" Wide Beartrap
Skirts: Length 26" (on 16” seat); Width 11" at front and 9" at rear, lined with faux shearling, 90% wool.                   
Cantle: Height 5" or 4" ;  Width  13"; Dish 1 ½"; Style 1 ½" Cheyenne Roll with Swirl, Hand Sewn.
Horn: Height 2 ¾", Diameter 2 ½", Leather covered, Hand Sewn.
Stirrup Leathers: 2 ½" with Leather Covered Blevins Buckles, machine sewn and copper riveted at the Blevins Buckles and the top of the fenders
Stirrups: Wooden metal bound natural rawhide covered, hand laced bell stirrups with 3" treads.
Rigging: Dropped plate rigging in 7/8’s position. Hardware is Stainless Steel Horseshoe Brand.
Leather: Available with 13-15 oz. Thoroughbred Mahogany, Walnut, or Golden Skirting.
Trim: Horseshoe Brand Cathedral Conchos with Tie Loops, All Hardware including the saddle screws and washers is Stainless
Steel.  Saddle strings cut from premium 5-7 oz. burgundy latigo. The bicycle style padded seat is constructed with 3/8" close cell
foam covered with 4-5 oz. chap leather. We use the Union Lockstitch to sew and pull the 277 white nylon thread tight at 5 ½ stitches to the inch.
Finish: Each Saddle first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner.
Tooling: Border Tooling, Barbed Wire Shown, others available

Special Price $ 2,395.00     # T-9010
New Models
Prices and descriptions coming soon, ask for details
Ranch & Trail Saddle T-9450
A beefed-up version of the B-Light Trail Saddle, has a double covered fiberglass tree with a wade post horn. Comes with mule hide horn wrap, cross over rope
strap, buck rolls and a 6” flank cincha. Ready for ranch work or the trails.
Tree: A beefed-up version of the B-Light Trail Tree, made of Southern Yellow Pine covered in a double hand-laid layer of 6 oz fiberglass cloth. Manufactured
exclusively for us by Steele Saddle Tree LLC. The ground work is hand shaped using skirting leather over a 20 oz. saddle strainer (tin seat).
Seat Size: Available in 15", 16" and 17".
Bars: Full Quarter Horse Bars; Reg QH, Semi-QH, Gaited, Mule are available
Weight: Approximately 34 lbs. with rigging
Gullet Height:8"
Swell: A-Fork; Width 10"
Skirts: Length 26" (on 16" seat); Width 11" at the front and 9" at rear, lined with faux shearling, 90% wool.
Cantle: Height 4"  Width  13"; Dish 1 ½"; Style 1½" Cheyenne Roll, Hand Sewn.
Horn: Height 2 ¾", Diameter 3", Leather covered, Hand Sewn, mule hide horn wrap.
Stirrup Leathers: 2½" with leather covered Blevins Buckles, machine sewn and copper riveted at the blevins buckle and the top of the fender.
Stirrups: Wooden metal bound natural rawhide covered, hand laced bell stirrups with 3" treads.
Rigging: Dropped plate rigging in 7/8's position. Hardware is Stainless Steel Horseshoe Brand with black inlay floral work.
Leather: 13-15 oz. Thoroughbred Golden, Mahogany, or Walnut Skirting.
Trim: Slotted Horseshoe Brand Conchos with black accents; all Hardware including the saddle screws and washers is stainless steel.  Saddle strings cut from
premium 5-7 oz. burgandy latigo. The bicycle padded seat is constructed with 3/8" close cell foam covered with 4-5 oz. chap leather. We use the Union Lockstitch
to sew and pull the 277 white nylon thread tight at 5 1/2 stitches to the inch.
Finish: Each  Ranch & Trail Saddle first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner. Edges
are burnished by hand rubbing.
Tooling: Border Tooled and Basket Stamped

Special Price $ 2,
695.00     # T-9450
Click on Picture to Enlarge
Click on Pictures to Enlarge
Click on Picture to Enlarge
Comfort Series Trail Saddle - T-9550
Tree: Comfort Trail Tree, Custom Fiberglass Covered Wood The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 15", 16", and 17".
Bars: Available in Semi-QH, Full Quarter Horse, Extra Wide for mutton withers, draft crosses, haflingers, etc., some at extra cost
Weight: Approximately 30 lbs.
Gullet Height: 8"
Swell: Width 12.5"
Skirts: Length 26" (on 16” seat); Width 11" at front and 9" at rear, lined with faux shearling, 90% wool.                   
Cantle: Height 4";  Width  13"; Dish 1 ½"; Style 1 ½" Cheyenne Roll, Hand Sewn.
Horn: Height 2 ¾", Diameter 2 ½", Leather covered, Hand Sewn.
Stirrup Leathers: 2 ½" with Leather Covered Blevins Buckles, machine sewn and copper riveted at the Blevins Buckles and the top of the fenders
Stirrups: Wooden metal bound
Rigging: Dropped plate rigging in 7/8’s position. Hardware is Stainless Steel Horseshoe Brand.
Leather: Available with 13-15 oz. Thoroughbred Mahogany, Walnut, Black or Golden Skirting.
Trim: Horseshoe Brand Cathedral Conchos with Tie Loops, All Hardware including the saddle screws and washers is Stainless Steel.  Saddle strings cut from
premium 5-7 oz. burgundy latigo. The bicycle style padded seat is constructed with 3/8" close cell foam covered with 4-5 oz. chap leather. We use the Union Lockstitch to
sew and pull the 277 white nylon thread tight at 5 ½ stitches to the inch.
Finish: Each Saddle first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner.
Tooling: Border Tooled with stems and turnbacks.
Special: Tapaderos, Rear 3 Piece Cinch, extra rear rings

Special Price $ 2,
595.00     # T-9550
The Wanderer Ultimate Trail and Overnight Saddle # T-3100
Tree: Fiberglass covered Solid Wood. The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer (tin seat). We shape this leather to sit you
comfortably in the saddle eliminating the need for all the fancy-named thick padding that many are using today to cover poor ground work.
Seat Size: Available in 15 " and 16".
Bars: Quarter Horse Bars, others available
Weight: Approximately 42 lbs.
Gullet Width: 6 ¾", others avaiable
Gullet Height: 8 ½"
Swell: Round Fork; Width 12".
Skirts: Length 27" (on 16"seat); Width 12 ½", lined with faux shearling, 90% wool.
Cantle: Height 4";  Width  13"; Dish 1 ½"; Style ½" Pencil Roll, Hand Sewn.
Horn: Solid Bronze by Boise Foundry; Height 3", Diameter 3" Leather covered, Hand Sewn.
Stirrup Leathers: 3" with Leather Covered Blevins Buckles, machine sewn and copper riveted at the Blevins Buckles and the top of the fenders
Stirrups: Brass Bound Wooden 2 ½" Visialia with Half Covers.
Rigging: Double Dee in 7/8's position, Solid Brass Dees.
Leather: 13-15 oz. Golden Skirting.
Trim: The Saddle comes with 8 ½" X 9" made on the back jockeys (not removable). All Hardware including the saddle screws and washers is Solid Brass.  Saddle
strings on this eight string set hang 36" from the rear button, 18" from the seat buttons, and 24" from the front button.  We use the Union Lockstitch to sew and pull
the 277 white nylon thread tight at 5 ½ stitches to the inch.
Finish: Each  Saddle first receives several warm coats of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner.
Tooling: Running W Border with shell on each side.

Special Price $ 3,995.00                    # T-3100
Click on Picture to Enlarge
Click on Picture to Enlarge
Secure Trail # T-9015
Tree: Custom Fiberglass Covered Wood
Seat Size: Available in 15", 16", and 17". The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Bars: Available in Semi-QH, Full Quarter Horse, Extra Wide for mutton withers, draft crosses, haflingers, etc., some at extra cost
Weight: Approximately 34 lbs.
Gullet Height: 7.5"
Swell: Swept Back 14" Wide Beartrap
Skirts: Length 26" (on 16” seat); Width 11" at front and 9" at rear, lined with faux shearling, 90% wool.                   
Cantle: Height 5" or 4" ;  Width  13"; Dish 1 ½"; Style 1 ½" Cheyenne Roll with Silver Lacing
Horn: Height 2 ¾", Diameter 2 ½", Leather covered, Hand Sewn.
Stirrup Leathers: 2 ½" with Leather Covered Blevins Buckles, machine sewn and copper riveted
at the Blevins Buckles and the top of the fenders
Stirrups: Wooden metal with 3" treads, Custom Tapedoros
Rigging: Dropped plate rigging in 7/8’s position. Hardware is Stainless Steel Horseshoe Brand. Rear 3 Piece Cinch is Standard
Leather: Available with 13-15 oz. Thoroughbred Mahogany, Walnut, or Golden Skirting.
Trim: Horseshoe Brand Cathedral Conchos with Tie Loops, All Hardware including the saddle screws and washers is Stainless Steel.  
Saddle strings cut from premium 5-7 oz. burgundy latigo. We use the Union Lockstitch to sew and pull the 277 white nylon thread tight at 5 ½ stitches to the inch.
Finish: Saddle first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner.
Tooling: Border Tooling with stems and turnbuckles, others available

Special Price $ 2,695.00     # T-9015
Click on Pictures to Enlarge
Comfort Series Endurance Trail Saddle T-9756
Tree: Comfort Trail Tree, Custom Fiberglass Covered Wood The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 15", 16", and 17".
Bars: Available in Semi-QH, Full Quarter Horse, Extra Wide for mutton withers, draft crosses, haflingers, etc., some at extra cost
Weight: Approximately 28 lbs.
Gullet Height: 8"
Swell: A-Fork; Width 10".
Skirts: Length 26" (on 16” seat); Width 11" at front and 9" at rear, lined with faux shearling, 90% wool.                   
Cantle: Height 4";  Width  13"; Dish 1 ½"; Style 1 ½" Pencil Roll, Hand Sewn.
Horn: Height 2 ¾", Diameter 2 ½", Leather covered, Hand Sewn.
Stirrup Leathers: 2 ½" with Leather Covered Blevins Buckles, machine sewn and copper riveted at the Blevins Buckles and the top of the fenders
Stirrups: Endurance Style with 4" treads.
Rigging: In-Skirt plate rigging in 7/8’s position. Hardware is Stainless Steel Horseshoe Brand.
Leather: Available with 13-15 oz. Thoroughbred Mahogany, Walnut, or Golden Skirting.
Trim: Horseshoe Brand Cathedral Conchos with Tie Loops, All Hardware including the saddle screws and washers is Stainless Steel.  Saddle strings cut from
premium 5-7 oz. burgundy latigo. The bicycle style padded seat is constructed with 3/8" close cell foam covered with 4-5 oz. chap leather. We use the Union
Lockstitch to sew and pull the 277 white nylon thread tight at 5 ½ stitches to the inch.
Finish: Each Saddle first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner.
Tooling: Double Cut Line Border

Special Price $ 2,095.00     # T-9756
T-9215 Secure Trail Hard Seat
Tree: Custom Swept Back Swell. . The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 15, 16 and 17"
Weight: Approximately 32 lbs.
Gullet Width: 6.5, 6.75, 7.0, 7.25 and 7.5"
Gullet Height: 7 ½"
Swell: Swept Back 13.5"
Skirts: Length 26" (on 16” seat); Width 11" at front and 9" at rear, lined with faux shearling, 90% wool.                   
Cantle: Height 5";  Width  13"; Dish 1 ½"; Style 1 ½" Pencil Roll
Horn: Height 2 ¾", Diameter 2 ½", Leather covered, Hand Sewn.
Stirrup Leathers: 2 ½" with Leather Covered Blevins Buckles, machine sewn and copper riveted
at the Blevins Buckles and the top of the fenders
Stirrups: Wooden with Tapedoros
Rigging: Dropped plate rigging in 7/8’s position. Hardware is Stainless Steel Horseshoe Brand.
Leather: Available with 13-15 oz. Thoroughbred Mahogany, Walnut, or Golden Skirting.
Trim: Horseshoe Brand Cathedral Conchos with Tie Loops, All Hardware including the saddle screws and washers is Stainless Steel.  Saddle strings cut from
premium 5-7 oz. burgundy latigo. The bicycle style padded seat is constructed with 3/8" close cell foam covered with 4-5 oz. chap leather. We use the Union
Lockstitch to sew and pull the 277 white nylon thread tight at 5 ½ stitches to the inch.
Finish: Each  Saddle first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner.
Tooling: Border Tooled with stems and turnbacks.

Special Price $ 2,
695.00        T-9215
Click on Pictures to Enlarge
T-8003L A-Fork Lady Wade Style Soft Seat
Tree: Batie Wood Tree. The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 15" and 16" Cushioned Bicycle Style
Weight: Approximately 33 lbs.
Gullet Width: 6.75" Quarter Horse Bars - Other Available
Gullet Height: 7 3/4"
Swell:  Width 10 ½"
Skirts: Length 26 ½"; Width 12", lined with faux shearling, 90% wool.
Cantle: Height 4"  Width  12 ½"; Dish 1 ½"; Style ½" Natural Rawhide Covered Pencil Roll, Hand Sewn.
Horn: Height 3", Diameter 3", rawhide tipped, leather covered, hand sewn with mule hide horn wrap.
Stirrup Leathers: 3" with leather covered Blevins Buckles
Stirrups: Wooden metal bound natural rawhide covered, hand laced bell stirrups with 3" treads.
Rigging: Dropped plate rigging in 7/8’s position. Hardware is Stainless Steel Horseshoe Brand.
Flank Cincha: 4" to 1 ¾"; burgundy latigo lined with deluxe stainless steel roller buckles.
Leather: 11-13 oz. Premium Thoroughbred Golden Skirting. Walnut and Mahogany Available
Trim: All Hardware including the saddle screws and washers is stainless steel.  Saddle strings cut from premium 7-8 oz. burgundy latigo. We use the Union
Lockstitch to sew and pull the 277 white nylon thread tight at 5 1/2 stitches to the inch.
Finish: Each Working Rancher receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner. Edges are
burnishedby hand rubbing.
Tooling: Hand Tooled Basket with Barbed Wire Border

Special Price $ 2,
695.00     # T-8003L
Click on Pictures to Enlarge
Click on Pictures to Enlarge