Specialty Saddles
M-3100 Old Fashined Cowboy Saddle, Many use it for Trails and Mounted Shooting - Round Skirt
Tree: Custom Tree. Rawhide Covered Wood. The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 14", 15 " and 16".
Weight: Approximately 40 lbs.
Gullet Width: 6 ¾" QH BArs
Gullet Height: 8 ½"
Swell: Round Fork; Width 12".
Skirts: Length 27" (on 16"seat); Width 12 ½", lined with faux shearling, 90% wool.
Cantle: Height 4";  Width  13"; Dish 1 ½"; Style ½" Pencil Roll, Hand Sewn.
Horn: Height 3 1/4", Diameter 2 1/4" Leather covered, Hand Sewn.
Stirrup Leathers: 2 ½" with Leather Covered Blevins Buckles, machine sewn and copper riveted at the Blevins Buckles and the top of the fenders
Stirrups: Wooden 3" Bell
Rigging: Sam Stagg in 7/8's position, leather covered stainless steel dees. Rigged with four 1 ¾" tie straps.
Leather: Premium 13-15 oz. Thoroughbred Walnut Skirting.
Trim: All Hardware including the saddle screws and washers is Stainless Steel.  Saddle strings on this eight string set hang 36" from the rear button, 18"
from the seat buttons, and 24" from the front button.  We use the Union Lockstitch to sew and pull the 277 white nylon thread tight at 5 ½ stitches to the
inch.
Finish: Each Mounted Shooter Saddle first receives several warm coats of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather
Conditioner.
Tooling: Running W border.
Style: A unique combination of period styling and today's comfort allow us to offer you a saddle with the authentic look you're after and yet have the feel of a
competition saddle.

Special Price $ 2,
695.00    # M-3100       Other Oil Colors Available       -     Square Shirt Also Available
Cowboy Saddles, Cowboy Saddle, Western Saddle, Western Saddles, Mounted Shooting Saddle


We can Customize any Saddle to fit your needs, Colors, Tooling and for a Variety of Horses and Mules
Click on Picture to Enlarge
R-8006 A-Fork Wade Style Hard Seat Tail or Roping Saddle
Tree: Batie Rawhide covered and rawhide laced. The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 15" and 16"
Weight: Approximately 35 lbs.
Gullet Width: 6.75" Quarter Horse Bars - Other Available
Gullet Height: 7 3/4"
Swell:  Width 10 ½"
Skirts: Length 26 ½"; Width 12", lined with faux shearling, 90% wool.
Cantle: Height 4"  Width  12 ½"; Dish 1 ½"; Style ½" Natural Rawhide Covered Pencil Roll, Hand Sewn.
Horn: Height 3", Diameter 3", rawhide tipped, leather covered, hand sewn with mule hide horn wrap.
Stirrup Leathers: 3" with leather covered Blevins Buckles
Stirrups: Wooden metal bound natural rawhide covered, hand laced bell stirrups with 3" treads.
Rigging: Dropped plate rigging in 7/8’s position. Hardware is Stainless Steel Horseshoe Brand.
Flank Cincha: 4" to 1 ¾"; burgundy latigo lined with deluxe stainless steel roller buckles.
Leather: 13-15 oz. Premium Thoroughbred Walnut Skirting.
Trim: All Hardware including the saddle screws and washers is stainless steel.  Saddle strings cut from premium 7-8 oz. burgundy latigo.
We use the Union Lockstitch to sew and pull the 277 white nylon thread tight at 5 1/2 stitches to the inch.
Finish: Each Working Rancher receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner.
Edges are burnished by hand rubbing.
Tooling: Hand Tooled Basket with Barbed Wire Border

Special Price $ 2,
695.00     # R-8006
Click on Picture to Enlarge
Click on Picture to Enlarge
Comfort Series Premium Trail Saddle
Tree: Comfort Trail Tree, Custom Fiberglass Covered Wood The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer
Seat Size: Available in 15", 16", and 17".
Bars: Available in Semi-QH, Full Quarter Horse, Extra Wide for mutton withers, draft crosses, haflingers, etc., some at extra cost
Weight: Approximately 30 lbs.
Gullet Height: 7.5"
Swell: Width 12.5"
Skirts: Length 26.5" (on 16” seat), lined with faux shearling, 90% wool. Skirts are Close Contact Design             
Cantle: Height 3.5";  Width  13"; Dish 1 ½"; Style 1 ½" Cheyenne Roll, Hand Sewn.
Horn: Height 2 ¾", Diameter 2 ½", Leather covered, Hand Sewn.
Stirrup Leathers: 2 ½" with Leather Covered Blevins Buckles, machine sewn and copper riveted
at the Blevins Buckles and the top of the fenders
Stirrups: Wooden metal bound natural rawhide covered, hand sewn and tooled stirrups with 3" treads.
Rigging: Dropped Dee in 7/8’s position. Hardware is Stainless Steel Horseshoe Brand.
Leather: Available with 13-15 oz. Thoroughbred Mahogany, Walnut, or Golden Skirting.
Trim: Cross Conchos, All Hardware including the saddle screws and washers is Stainless Steel. The padded seat is constructed with 3/8" close cell
foamcovered with 4-5 oz. chap leather. We use the Union Lockstitch to sew and pull the 277 white nylon thread tight at 5 ½ stitches to the inch.
Finish: Each Saddle first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner.
Tooling: Fully Hand Engraved on Shirts, Housing, Stirrups, Cantle and Pommel

Special Price $ 2,995.00     # T-5008                                 
Click on Picture to Enlarge
The Wanderer Ultimate Trail and Overnight Saddle # T-3100
Tree: Fiberglass covered Solid Wood. The ground work is hand shaped using skirting leather over a 20 gauge saddle strainer (tin seat). We shape this leather to sit you
comfortably in the saddle eliminating the need for all the fancy-named thick padding that many are using today to cover poor ground work.
Seat Size: Available in 15 " and 16".
Bars: Quarter Horse Bars, others available
Weight: Approximately 42 lbs.
Gullet Width: 6 ¾", others avaiable
Gullet Height: 8 ½"
Swell: Round Fork; Width 12".
Skirts: Length 27" (on 16"seat); Width 12 ½", lined with faux shearling, 90% wool.
Cantle: Height 4";  Width  13"; Dish 1 ½"; Style ½" Pencil Roll, Hand Sewn.
Horn: Solid Bronze by Boise Foundry; Height 3", Diameter 3" Leather covered, Hand Sewn.
Stirrup Leathers: 3" with Leather Covered Blevins Buckles, machine sewn and copper riveted at the Blevins Buckles and the top of the fenders
Stirrups: Brass Bound Wooden 2 ½" Visialia with Half Covers.
Rigging: Double Dee in 7/8's position, Solid Brass Dees.
Leather: 13-15 oz. Golden Skirting.
Trim: The Saddle comes with 8 ½" X 9" made on the back jockeys (not removable). All Hardware including the saddle screws and washers is Solid Brass.  Saddle
strings on this eight string set hang 36" from the rear button, 18" from the seat buttons, and 24" from the front button.  We use the Union Lockstitch to sew and pull
the 277 white nylon thread tight at 5 ½ stitches to the inch.
Finish: Each  Saddle first receives several warm coats of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner.
Tooling: Running W Border with shell on each side.

Special Price $ 3,995.00                    # T-3100