Cutting Saddles
Cutting Saddles, Cutting Saddle, Western Saddle, Western Saddles, Ranch Cutting Saddle, Ranch Cutting Saddles


We can Customize any Saddle to fit your needs, Colors, Tooling and for a Variety of Horses and Mules
C-4100 Ranch Cutting Saddle
Tree: Ranch Cutter, Wood covered Rawhide covered and rawhide laced.  The ground work is hand shaped using skirting leather over a 20
gauge saddle strainer.
Seat Size: Available in 16" and 17"
Weight: Approximately 45 lbs.
Gullet Width: 6 ¾" Quarter Horse Arizona Bars
Gullet Height: 7 ½"
Swell: Buster Welch; Width 13"
Skirts: Length 28"; Width 14 ½", lined with genuine bark tan  1" thick wool shearlings, 1" density.
Cantle: Height 3 ½"  Width  12”; Dish 1 ¼”; Style 1 ¾” Cheyenne Roll, Hand Sewn, 5 stitches to the inch, 5 cord flax thread.
Horn: Height 3 ½”, Diameter 1 ¾", leather covered, hand sewn.
Stirrup Leathers: 3" with leather covered Blevins Buckles
Stirrups: Wooden bell stirrups with 3" hand laced leather treads.
Rigging: Double dee rigging in 7/8’s position. Hardware is Stainless Steel.
Flank Cincha: 6" tapering to 4" to 1 ¾"; burgundy latigo lined with deluxe stainless steel roller buckles.
Leather: 15-17 oz. Thoroughbred Golden Skirting.
Trim:  Hansen Western Gear’s Kansas silver plate conchos. All Hardware including the saddle screws and washers is stainless steel.  
Saddle strings cut from premium 7-8 oz. burgundy latigo. We use the Union Lockstitch to sew and pull the 346 white nylon thread tight at 5 1/2
stitches to the inch.
Finish: Each Ranch Cutter first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner.
Edges are burnished by hand rubbing.
Tooling: Hand carved Oak Leaf and Vertical Basketweave with Shell Border.

Special Price $ 2,
995.00         # C-4100              Note: Other Oils Available
Click on Picture to Enlarge
C-4200 Ranch Cutter
Tree:  Ranch Cutter, Custom Batie Rawhide covered and rawhide laced. The ground work is hand shaped using skirting leather over a 20 gauge
saddle strainer
Seat Size: Available in 16" and 17".
Weight: Approximately 45 lbs.
Gullet Width: 6 ¾" QH Bars
Gullet Height: 7 ½"
Swell: Buster Welch; Width 13"
Skirts: Length 28"; Width 14 ½", lined with faux shearling, 90% wool.
Cantle: Height 3 ½"  Width  12"; Dish 1 ¼"; Style 1 ¾" Cheyenne Roll, Hand Sewn.
Horn: Height 3 ½", Diameter 1 ¾", leather covered, hand sewn.
Stirrup Leathers: 3" with leather covered Blevins Buckles
Stirrups: Wooden metal bound natural rawhide covered, hand laced bell stirrups with 3" treads.
Rigging: Double dee rigging in 7/8’s position. Hardware is Stainless Steel.
Flank Cincha: 6" tapering to 4" to 1 ¾"; burgundy latigo lined with deluxe stainless steel roller buckles.
Leather: 15-17 oz. Thoroughbred Golden Skirting.
Trim: Horseshoe Brand Floral Slotted  Conchos with black accents. All Hardware including the saddle screws and washers is stainless steel.  
Saddle strings cut from premium 7-8 oz. burgundy latigo. We use the Union Lockstitch to sew and pull the 346 white nylon thread tight at 5 1/2
stitches to the inch.
Finish: Each Ranch Cutter first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner.
Edges are burnished by hand rubbing.
Tooling: Hand carved floral and Hamley swirl with lined petal border.

Special Price $ 2,
995.00         # C-4200
Click on Picture to Enlarge
C-4000 Ranch Cutting Saddle
Tree: Custom Ranch Cutter, Rawhide Covered Wood and rawhide laced. The ground work is hand shaped using skirting leather over a 20 gauge
saddle strainer
Seat Size: Available in 16" and 17".
Weight: Approximately 45 lbs.
Gullet Width: 6 ¾" Quarter Horse Arizona Bars
Gullet Height: 7 ½"
Swell: Buster Welch; Width 13"
Skirts: Length 28"; Width 14 ½", lined with genuine bark tan  1" thick wool shearlings, 1" density.
Cantle: Height 3 ½"  Width  12"; Dish 1 ¼"; Style 1 ¾" Cheyenne Roll, Hand Sewn, 5 stitches to the inch, 5 cord flax thread.
Horn: Height 3 ½", Diameter 1 ¾", leather covered, hand sewn.
Stirrup Leathers: 3" with leather covered Blevins Buckles
Stirrups: Wooden metal bound leather covered, machine sewn bell stirrups with 3" treads.
Rigging: Double dee rigging in 7/8’s position. Hardware is Stainless Steel.
Flank Cincha: 6" tapering to 4" to 1 ¾"; burgundy latigo lined with deluxe stainless steel roller buckles.
Leather: 15-17 oz. Thoroughbred Walnut Skirting.
Trim: Hansen Western Gear’s Tempe Sterling Silver Overlay Conchos. All Hardware including the saddle screws and washers is stainless steel.  
Saddle strings cut from premium 7-8 oz. burgundy latigo. We use the Union Lockstitch to sew and pull the 346 white nylon thread tight at 5 1/2
stitches to the inch.
Finish: Each Ranch Cutter first receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner.
Edges are burnished by hand rubbing.
Tooling: Hand carved floral with Carlos Border. - Other Styles Available

Special Price $
3,095.00    # C-4000          Note: Other Oils Available
Click on Picture to Enlarge
C-4300 Ranch Cutting Saddle

Tree: Modified Buster Welch, rawhide covered and rawhide laced. Manufactured by Batie’s Custom Saddle Tree, Inc. The ground work is hand
shaped using skirting leather over a 20 gauge saddle strainer (tin seat).
Seat Size: Available in 16" and 17".
Bars: Full Quarter Horse Cutting Horse Bars.
Weight: Approximately 42 lbs.
Gullet Width: 6 3/4"
Gullet Height: 8"
Swell:  Width 13"
Skirts: Length 29"; Width 13", lined with faux shearling, 1" density.
Cantle: Height 3"  Width  12"; Dish 1 1/4"; Style 1 1/2" Leather Covered  Cheyenne Roll, Hand Sewn.
Horn: Height 3 3/4", Diameter 1 1/2",  leather covered.
Stirrup Leathers: 2 1/2" with leather covered Blevins Buckles
Stirrups: Aluminum Oxbows with 1" leather covered treads.
Rigging: Double Dee rigging in your choice of full or 7/8’s position. Hardware is stainless steel.
Flank Cincha: 6" tapering to 4" to 1 3/4"; burgundy latigo lined with deluxe stainless steel roller buckles.
Leather: 13-15 oz. Golden Skirting.
Trim: All Hardware including the saddle screws and washers is stainless steel.  Silver Conchos. We use the Union Lockstitch to sew and pull the
277 white nylon thread tight at 5 1/2 stitches to the inch.
Finish: Each Working Class Cutter receives a warm coat of 100% pure neatsfoot oil followed by a generous coat of Aussie Leather Conditioner.
Edges are burnished by hand rubbing and finished with Fiebings Edge Kote.
Tooling: Hamley Swirl with Horse Shoe Brand S37 Continuous Border.

Special Price $ 2,
695.00    # C-4300          Note: Other Oils and Trees Available
Click on Picture to Enlarge